Now many people are dissatisfied with the work efficiency of non-standard automation equipment, so they will transform non-standard automation equipment, but the effect is not obvious, why is this? What misunderstandings exist in the transformation of non-standard automation equipment?

1. The robot can be used after it is bought
As a smart device, the robot cannot be used simply by installation and debugging. If the development (or secondary development) and application of robots are ignored, many robots will be bought out of use or used improperly. Take the analogy between robots and sports players, a group of good players (robots) plus a good coach (system integrator) is the key to the victory of the entire team (enterprise).

2. The introduction of robots is to carry out automation upgrades
The application of robots is a representative aspect of automation upgrading. But that doesn't mean it can solve all problems. Pneumatic hydraulic control and automation of non-standard equipment are also one of the very important means to realize automation. Especially for some special applications, non-standard automation equipment is the answer. For automation upgrading and transformation, you must not just stare at robots. Multiple channels are good.

3. Any process can be replaced by automated equipment

Products produced by automated production lines should have a large enough output; product design and technology should be advanced, stable, reliable, and remain basically unchanged for a long time. Not all processes are suitable for automation. The use of automatic lines in mass and mass production has significant economic benefits.

4. Automation upgrade and transformation can be done in one step

The real automation upgrade is not a simple station or machine replacement, but an extremely complex system engineering. Automation transformation needs to be done within one’s capacity, starting from relatively mature automation technology, starting from the parts of the factory that are in urgent need of upgrading and transformation, and gradually proceeding, and must not pursue one step.

The above are the misunderstandings in the transformation of non-standard automation equipment.